Updated Nov 22, 2026· 11 min read

Our Top Picks

  1. KIWI design Upgraded Comfort Controller Grips Compatible with0.4 pounds
    Check on Amazon
  2. AMVR Upgraded Non-Slip Controller Grips with Battery OpeningStandard Version0.2 pounds
    Check on Amazon
  3. Meta Quest Active Straps0 x 0 x 0 inches0.2 poundsSoftware Key Card
    Check on Amazon
  4. AMVR Controller Grips Compatible with Meta/Oculus Quest 3/QuestOne Size4.72 x 1.97 x 1.57 inches0.1 pounds
    Check on Amazon
  5. Maecker VR Anti-Slip Controller Straps for Meta Quest3.93 x 2.36 x 0.78 inches
    Check on Amazon

As an Amazon Associate we earn from qualifying purchases.

The stock Touch Plus controllers that ship with the Quest 3 and Quest 3S are light and well balanced, but they ask your fingers to do all the work. In a relaxed game that is fine. In a boxing workout, a climbing game or a long Beat Saber session, a constant squeeze leads to tired hands, sweaty palms and the occasional controller launched across the room. Controller grips and knuckle straps fix that by tying the controller to your hand, so it stays put even when you open your fingers completely.

Our top pick: KIWI design Upgraded Comfort Controller Grips. Runner-up: AMVR Upgraded Controller Grips Cover.

Two design families dominate. Full silicone covers wrap the handle in a textured sleeve and add a strap across the back of your hand: they protect against knocks and sweat as well as drops. Strap-only designs skip the sleeve and anchor a woven knuckle strap through the battery door, adding almost no bulk. One warning before you buy anything: Quest 2 grips do not fit Quest 3 or 3S controllers. The Quest 2 Touch controllers carry a large tracking ring around the thumbstick, while the Touch Plus controllers are ringless with their infrared LEDs spread across the faceplate and handle, and the shells are shaped differently. Every pick below is made for Touch Plus controllers.

Affiliate Disclosure: This article contains affiliate links. If you buy through a link on this page, we may earn a commission at no extra cost to you.

1. KIWI design Upgraded Comfort Controller Grips — Full Cover With a Battery Hatch

KIWI design’s Upgraded Comfort grips are the full-cover option that tries to give up nothing. The silicone sleeve wraps the whole handle with a textured, frilled inner surface that keeps the cover seated during fast swings, and the hand strap runs across your knuckles so you can open your hand to throw, grab or relax your fingers without the controller going anywhere. The original wrist strap can still be threaded through a hole at the base, which few rival covers allow.

Battery swaps are the detail that usually ruins full covers, and KIWI design handles it with an opening in the cover: a replacement battery cover and a peel-back hatch in the silicone let you reach the AA cell without stripping the grip off. Tracking is protected by design rather than luck — the silicone around the controller’s upper shell is formulated to let the infrared tracking signal pass through, so the LEDs on the ringless Touch Plus faceplate are not blanketed by opaque material. If you want one cover that adds grip, protection and a strap while keeping battery changes painless, this is the balanced pick.

Specs

  • Compatibility: Meta Quest 3 and Quest 3S (Touch Plus controllers)
  • Model: Q1 Pro-2.2
  • Material: Silicone cover with adjustable hand strap
  • Battery access: Opening in cover with replacement battery cover; no need to remove the grip
  • Wrist strap: Original wrist strap can remain attached
  • Tracking: Signal-transparent silicone around the sensor area
  • Includes: 1 pair of grip covers with straps

2. AMVR Upgraded Controller Grips Cover — The Battery-Door Replacement System

AMVR takes the opposite approach to battery access: instead of cutting a window in a cover, it replaces the battery door itself. The kit includes a pair of battery compartment covers with the grip system built around them, plus four plastic pull tabs — two pre-mounted — that sit under the AA cell so a dead battery pops out with a tug. The silicone covers then fit over the top, with nylon hook-and-loop knuckle straps anchored on rotatable rivets so you can tune both the tension and the angle of the strap across your hand.

The result is a secure, compact setup that keeps the controller close to its stock silhouette, and the soft silicone shrugs off the sweat and light knocks of active games. Two honest limitations: AMVR states plainly that this version is not made for the official charging dock, so dock owners should look at the strap-only picks below; and the system only works because it replaces a factory part, so keep the original battery covers somewhere safe in case you ever want to go back. It comes in standard and extended sizes, the extended version adding handle length for bigger hands.

Specs

  • Compatibility: Meta Quest 3 and Quest 3S (Touch Plus controllers)
  • Model: Q3HS1
  • Material: Silicone covers, nylon hook-and-loop straps
  • Battery access: Replacement battery covers with pull tabs included (4 tabs, 2 pre-mounted)
  • Strap adjustment: Rotatable rivets for strap angle, hook-and-loop tension
  • Sizes: Standard (Common) and Extended
  • Charging dock: Not compatible with the official charging dock
  • Includes: 1 pair of grip covers, 1 pair of battery covers, 4 battery pull tabs

3. Meta Quest Active Straps — The Official Strap-Only Option

Meta’s own answer is the minimalist one. The Active Straps add no sleeve at all: each strap is a woven nylon band that anchors to the controller through a replacement battery door with a metal loop, then fastens across your knuckles with a relaxed, adjustable fit. At 27 grams per strap, they change the weight and balance of the controller less than any cover can, and nothing wraps the handle, so the infrared LEDs keep a completely clear view of the headset cameras.

Because Meta designed them alongside the hardware, the compatibility questions that dog third-party grips mostly disappear. Controllers wearing Active Straps still fit the official Quest carrying cases and the official charging docks, and battery changes are just a matter of popping the door the strap is anchored to. The trade-off is protection: a strap keeps the controller attached to your hand, but it does nothing to cushion the shell if the controller still meets a wall or a coffee table. Players who want security with zero added bulk, and who store their kit in the official case, are exactly who these are built for.

Specs

  • Compatibility: Touch Plus controllers only (Quest 3 and Quest 3S); not for Quest 2
  • Material: Woven nylon knuckle strap, metal anchor loop, plastic battery door
  • Weight: 27 g per strap
  • Strap width: 20 mm
  • Battery access: Strap anchors through the battery door; door removes normally
  • Case and dock fit: Fits official Quest carrying cases and charging docks
  • Includes: 2 Active Straps (left and right)

4. AMVR Controller Grips — Slim Full Cover for Smaller Hands

AMVR’s second entry in this roundup is a different product from the battery-door kit above: a slim, one-piece silicone cover that follows the shape of the stock controller closely, with an extended knuckle strap and a textured, anti-slip surface. The listing aims it squarely at small and medium hands — the cover adds texture and security without the extra handle length or thickness that can make a controller feel oversized if your hands are on the smaller side.

The thin profile pays off in daily use. Because the cover tracks the original battery cover’s design, swapping the AA cell stays quick, and the silicone-plus-PU-leather strap materials wipe clean after sweaty sessions. AMVR notes that the grips are not compatible with the rechargeable batteries used by the official charging dock, so they suit players who run disposable or separately charged AA cells. If full covers from other brands feel like holding a tennis ball, this slimmer pattern is the one to try.

Specs

  • Compatibility: Meta Quest 3 and Quest 3S (Touch Plus controllers)
  • Model: Q3HB1
  • Material: Silicone, plastic and PU leather strap
  • Dimensions: 1.97 x 4.72 x 1.57 in per grip
  • Hand fit: Sized for small and medium hands
  • Battery access: Thin cover follows the stock battery cover design
  • Charging dock: Not compatible with official dock rechargeable batteries
  • Colors: Black or white
  • Includes: 1 pair of grip covers with straps

5. Maecker VR Anti-Slip Controller Straps — Straps That Keep the Dock Happy

Maecker’s straps take the strap-only idea and tune it for players who charge on the official dock. The finely woven nylon bands have a touch of elasticity, which gives them a naturally snug, anti-slip hold across the knuckles without cranking down on a buckle, and they adjust to different hand sizes. With no silicone sleeve in the way, the controllers seat on the official Quest 3 charging dock with the straps fitted — a small detail that saves the daily ritual of stripping accessories before charging.

Like Meta’s Active Straps, this design adds retention and nothing else: no shell protection, no extra handle thickness, no change to how the controller sits in a molded case. The woven surface grips the back of the hand better than smooth straps, which matters in fitness games where everything gets damp. For players who want to open their hands mid-game, keep their dock routine untouched and leave the controllers otherwise stock, this is the low-fuss route.

Specs

  • Compatibility: Meta Quest 3 and Quest 3S (Touch Plus controllers)
  • Material: Finely woven elastic nylon strap
  • Design: Strap-only, no silicone cover
  • Battery access: Unobstructed; no cover to remove
  • Charging dock: Compatible with the official Quest 3 charging dock
  • Adjustment: Adjustable knuckle strap fit for different hand sizes
  • Includes: 1 pair of controller straps

How to Choose VR Controller Grips and Knuckle Straps

Decide between a cover and a strap first. Full silicone covers (the two AMVR models and the KIWI design grips above) add texture, sweat management and bump protection, and they are the better choice for shared headsets and energetic games. Strap-only designs (Meta’s Active Straps and the Maecker straps) add the least weight and bulk, keep cases and docks working, and suit players who like the stock controller feel. Both styles let you fully open your hand — the core benefit for throwing motions, climbing games and relaxed long sessions.

Check the battery plan before you buy. Touch Plus controllers run on AA cells, and grips handle swaps very differently. Hatch-style covers (KIWI design) open a window over the compartment. Replacement-door systems (AMVR’s Q3HS1 kit, and the anchor design of Meta’s straps) build the strap into a new battery cover, with AMVR adding pull tabs to make cell removal easy. Plain tight covers may need to come off entirely. If you use rechargeable dock batteries, verify compatibility: AMVR states its grips do not suit the official dock setup, while the Maecker straps are made to stay on for dock charging.

Protect the tracking. Quest 3 and 3S controllers have no tracking ring; their infrared LEDs sit on the faceplate and around the handle, and the headset reads those LEDs to place your hands. A cover that drapes opaque material over LED positions, or one that shifts as you play, will cause drifting and lost tracking. Look for covers that use translucent, signal-passing silicone around the top shell or that leave the LED zones open, and seat the cover exactly as the maker instructs. This is also why Quest 2 grips are not interchangeable: they are molded around a tracking ring that no longer exists.

Mind the added bulk. Every cover thickens the handle, and molded carrying cases are cut for bare controllers. Extended grip sizes add length as well as girth — great for large hands, a problem for compact cases. If you travel with the official case, strap-only designs are the safe fit; if you use a roomy third-party case, covers are usually fine. Players with smaller hands should start with slim covers like the AMVR Q3HB1 rather than extended models.

Match the grip to your games. Fitness and rhythm titles reward sweat-shedding texture and a strap you can trust at full swing. Shooters benefit from a relaxed hand that still finds the trigger instantly, which any knuckle strap provides. Sim and social players who set controllers down often may prefer straps that add nothing to pick up around. And if your household shares one headset, prioritize strap adjustment range so the same pair fits everyone.

FAQ

Do knuckle straps really let you let go of the controller?
Yes — that is their main job. A correctly adjusted strap holds the controller against your palm when your fingers open, so you can throw objects naturally, climb hand over hand, wave, or simply unclench during long sessions. The controller dangles from the strap rather than falling, and your fingers find the grip again without looking.

Will grips or covers break Quest 3 controller tracking?
They can if they cover the infrared LEDs or slip out of alignment. Touch Plus controllers place their LEDs on the faceplate and handle instead of a ring, so choose covers designed for the Quest 3 or 3S specifically, with signal-passing material or cutouts around the sensor areas, and make sure the cover is fully seated. Strap-only designs cannot block the LEDs at all.

Can I use Quest 2 controller grips on a Quest 3?
No. Quest 2 Touch controllers have a different shell shape and a prominent tracking ring; Quest 3 and 3S Touch Plus controllers are ringless and shaped differently. Grips, covers and battery doors are not interchangeable between the generations, so buy accessories listed for Touch Plus controllers.

Do grips stop the controllers fitting in a case or charging dock?
It depends on the design. Full silicone covers add thickness and length, and many will not sit in molded official cases or on docks — AMVR explicitly excludes dock use for its covers. Meta’s Active Straps are designed to fit the official cases and docks, and the Maecker straps are made to stay fitted while dock charging. Check your case and dock combination before choosing a cover.

How do I change the battery with grips fitted?
With hatch-style covers, peel back the opening and swap the AA cell in place. With replacement-door systems like AMVR’s kit, use the included pull tab to lift the cell out through the built-in cover. Strap-only designs leave the battery door fully accessible. The only slow route is a plain tight cover with no opening, which has to be removed — one more reason to check the battery design before ordering.

Conclusion

For most Quest 3 and 3S players, the KIWI design Upgraded Comfort grips are the easiest single upgrade: a protective full cover, a secure knuckle strap and battery access that does not require undressing the controller. Players who would rather keep the controllers bare should choose between Meta’s Active Straps for guaranteed case and dock fit, and the Maecker straps for elastic comfort that also plays nicely with the official dock. AMVR covers both remaining niches — the Q3HS1 kit for the neatest battery-swap system, and the slim Q3HB1 cover for smaller hands. Whichever route you take, buy for Touch Plus controllers, keep the tracking LEDs clear, and your hands can finally relax mid-game.

D
Dylan Brooks
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best VR Controller Grips and Knuckle Straps for…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.